TM-2DLI 2-Wire Isolated Universal Transmitter

TM-2DLI

TM-2DLI 2-Wire Isolated Universal Transmitter

Universal Input, 4-20mA Output, Loop Powered, DIN Rail Mounting

Share This Product

What it does

The TM-2DLI accepts one of several input signal types and generates a 4-20mA or 20-4mA output.
This versatile 2-wire transmitter accepts a range of standard input types, and outputs a 4-20mA loop. USB programming is hassle free, and takes less than a minute using Define ToolBox.
  • 2-wire universal transmitter (DIN-mount, isolated)
  • Current, voltage, thermocouple, RTD and potentiometer input
  • Loop powered, 4-20mA output
  • LED indicator for error notification
  • Potentiometer for fine offset adjustment of current output

Easy USB programming using Define ToolBox

  • No power supply or calibrator required
  • Uses the universal USB Bridge Key (sold separately) for PC connection

Try Before You Buy!

Use the product simulator inside our free ToolBox software to demo how this instrument works.

Bridge Key Required!

In addition to this software a Bridge Key is required for the configuration of this product.

You must order one unless you already have one from a previous product purchase.

Specifications

Universal Input


Configuration: 2 wire


Number of universal inputs: 1 isolated universal input, full input specifications below


Power


Power supply: 10.5-36V DC


Supply voltage sensitivity: <±0.005%/V FSO


General Specifications


Accuracy: ≤ ±0.1% of span


Accurate to: <±0.03% FSO typical


Ambient drift: <±0.003%/°C FSO typical


Isolation test voltage: Between input and output: 3750V AC for 1min


Noise immunity: 125dB CMRR avg (2.0kV DC limit)


RF immunity: <1% effect FSO typical


Maximum load: 1,200Ω (at 20mA with 36V input)


Linearization tables: 32-point flexible linearization available


Response time: 400msec typical (10-90% 300msec typical)


Thermocouple Input


Thermocouple types: B, E, J, K, N, R, S, T


Input impedance: 1MΩ min


T/C lead resistance: 100Ω max


Cold junction compensation: -4 to 194°F (-20 to 90°C)


CJC error: <±1°C


Accuracy: E, J, K, N, T: <±1°C. B, R, S: <±2°C


Ambient drift: E, J, K, N, T: <±0.05°C. B, R, S: <±0.2°C


Sensor break output drive: Function high upscale/low downscale


USB programmable zero: 0–±99% of the span


RTD Input


RTD input type: PT100 or PT1000 DIN 3-wire type (2-wire can be used with off set calibration)


Lead wire resistance: PT100: 10Ω/wire max. PT1000: 5Ω/wire max 0.02% FSO off set error per Ω of lead resistance.


Sensor current: 0.15mA nominal


Sensor break output drive: Function high upscale/low downscale


USB programmable zero: 0–±99% of the span


USB programmable span: –328 to 1562°F (–200 to 850°C)


Linearity (PT100): 0.02% FSO for span inputs ≤200°C. 0.1% FSO for span inputs ≤850°C


Linearity (PT1000): 0.02% FSO for span inputs ≤200°C. 0.2% FSO for span inputs ≤520°C


Other available RTD types: JIS, PT392, CN10


Current Input


USB programmable zero: 0–±99% of the span


Field programmable span: 1μA–24mA DC


Input impedance: 10Ω


Max over-range: 50mA DC continuous


Linearity & repeatability: <±0.02% FSO typical



Voltage Input


USB programmable zero: 0–±99% of the span


USB programmable span: 100mV to ±10V DC (bipolar)


Input impedance: 300kΩ min


Maximum over voltage: 60V DC continuous


Linearity & repeatability: <±0.02% FSO typical


Potentiometer Input


Potentiometer input: 3-wire potentiometer


Excitation voltage: 1.2V DC


Potentiometer resistance: 0–2KΩ low pot, 0–1MΩ high pot


Field programmable zero: 0–90% of the span


Field programmable span: 0.1–100%


Linearity & repeatability: <±0.02% FSO typical


Analog Output (Retransmission)


Analog output type: 4-20mA or 20-4mA (loop powered)


Output load resistance: 650Ω at 24V DC (50Ω/V above 10.5V DC)


Max output current: Limited to < 28mA (emission and immunity)


Programming


Define ToolBox: Simple programming using Define ToolBox (requires Bridge Key, sold separately)


Construction


Casing: 35mm DIN mount case


Dimensions (H x W x D): 3.11 x 0.79 x 2.68″ (79 x 20 x 68mm)


LED indication: Flashing=Normal, On=Fault


Potentiometer: For fine offset adjustment of current output


Environmental Conditions


Operating temperature: -4 to 185°F (-20 to 85°C)


Storage temperature: -4 to 185°F (-20 to 85°C)


Operating humidity: 5–85%RH max (non-condensing)


Certifications & Compliances


Casing: Panel mount case


EMC: EN61326 (Emissions); EN61326 (Immunity); EN61010-1 (Safety)

Documents

TM-2DLI Manual 15V11, 09-Oct-2015 | (334 KB)

Software


Define ToolBoxDefine ToolBox

Smart, simple software to program your non-Zen series products

Use Define ToolBox software to program your non-Zen series product via your PC. It configures:

ToolBox offers a simple interface for connecting to your compatible device, and a range of flexible configuration options, including an extensive library of pre-calibrated ranges and linearization tables for advanced scaling.


Define ToolBox Configuration Software

All prices are in US Dollars. For pricing in other currencies, please contact us.