TEX-DEW200 Humidity/Temperature Controller

TEX-DEW200 Humidity/Temperature Controller
Dual Display Wet/Dry Bulbs, 2x RTD PT100, 2×6-digit Panel Meter/Controller
Additional information
Weight | 0.853 kg |
---|---|
Dimensions | 11.8 × 16.9 × 5.9 cm |
Power Supply | – 85-265V AC / 95-370V DC (HV) |
Relay Output | – None |
Analog Output | – 2 x 4-20mA analog outputs (included by default) |
Serial Port | – None |
What it does
This controller has been designed for wet/dry bulb relative humidity applications. It comes factory pre-calibrated to suit 385 RTD input, and features dual
4-20mA analog output and a dual display for temperature and R.H.
At a glance:
- Dual 3-wire RTD input (385/392, PT100). Suits wet/dry bulbs
- Dual display for simultaneous viewing of humidity and temperature
- Dual analog output (4-20mA)
- Simple, intuitive interface with scrolling text prompts
- Factory calibrated for 385RTD – simple recalibration using high and low input signals
- Security PIN protected calibration and setpoint access


Specifications
Input
Sensor input: 1 x wet bulb, 1 x dry bulb. Dual 3-wire RTD (385/392), PT100
Sampling rate: 2.5Hz
Resolution: 0.025% full scale, 16 bit
Accuracy: 0.05% of reading
Ambient drift: 50ppm/°C typical
Temperature units: °F or °C
Calibration: Calibrated for 385 RTD, 0–100°C. Simple recalibration (if needed) using high and low display values
Power
Power supply: HV: 85–265V AC / 95–370V DC, or LV: 15–48V AC / 10–72V DC
Features
Security: Input and setpoint setups are independently accessible and PIN protected
Relay Output
Number of relay outputs: None, 2 or 4
Relay output type: 5A form A (3A 240V AC max or 3A 30V DC max)
Analog Output (Retransmission)
Number of analog outputs: 2 (humidity & temperature)
Analog output type: Isolated 16 bit 4–20mA
Comm Port(s)
Serial port configuration: 1 x isolated RS232 or RS485 (optional)
Programming
Front panel buttons: Up, Down, P (Prog/Enter), 2 x Function Buttons for menu access
Display
Display type: LED display, 5 buttons
LED indicators: 6 setpoint indicator LED’s
Digits: 2 rows of 6 digits, 0.4″ (10mm), 14 segment alphanumeric LED
Construction
Casing: Panel mount case
Ingress protection rating: IP65 dust/splash proof (face only)
Dimensions (H x W x D): 3.8 x 1.9 x 4.7″ (96 x 48 x 120mm)
Documents
Order Codes
TEX-DEW200 |
|
-HV | 85-265V AC / 95-370V DC |
-LV | 15-48V AC / 10-72V DC |
Analog Output (Included by Default) | |
2 x 4-20mA analog outputs | |
Relay Output (Optional) | |
None | |
-R2 | 2 x relay outputs |
-R4 | 4 x relay outputs |
Comms (Optional) | |
None | |
-S2R | 1 x RS232 serial port (RJ11 terminal) |
-S4S | 1 x RS485 serial port (screw terminal) |
Sample order codes: TEX-DEW200-HV, TEX-DEW200-HV-R2, TEX-DEW200-HV-R2-S2R, TEX-DEW200-HV-R2-S4S, TEX-DEW200-HV-S2R, TEX-DEW200-HV-S4S, TEX-DEW200-HV-R4, TEX-DEW200-HV-R4-S2R, TEX-DEW200-HV-R4-S4S, TEX-DEW200-ADI-HV, TEX-DEW200-ADIS-HV, TEX-DEW200-R2ADI-HV, TEX-DEW200-R2ADIS-HV, TEX-DEW200-R4ADI-HV, TEX-DEW200-R4ADIS-HV, TEX-DEW200-LV, TEX-DEW200-LV-R2, TEX-DEW200-LV-R2-S2R, TEX-DEW200-LV-R2-S4S, TEX-DEW200-LV-S2R, TEX-DEW200-LV-S4S, TEX-DEW200-LV-R4, TEX-DEW200-LV-R4-S2R, TEX-DEW200-LV-R4-S4S, TEX-DEW200-ADI-LV, TEX-DEW200-ADIS-LV, TEX-DEW200-R2ADI-LV, TEX-DEW200-R2ADIS-LV, TEX-DEW200-R4ADI-LV, TEX-DEW200-R4ADIS-LV |
All prices are in US Dollars. For pricing in other currencies, please contact us.