PRO-TC Quad Thermocouple Controller

PRO-TC Quad Thermocouple Controller

PRO-TC Quad Thermocouple Controller

4x Thermocouple J/K/N/R/T Types, 6-digit Panel Meter/Controller

Additional information

Weight 0.88 kg
Dimensions 11.8 × 16.9 × 5.9 cm
Power Supply

– 85-265V AC / 95-370V DC (HV)
– 15-48V AC / 10-72V DC (LV)

Relay Output

– None
– 2x Relay Outputs
– 4x Relay Outputs

Analog Output

– None
– 1x 4-20mA / 0-10V

Serial Port

– None
– 1x RS232 (RJ Terminal)
– 1x RS485 (Screw Terminal)

Share This Product

What it does

Accepts input from up to four thermocouple sensors, and performs averaging calculations as per your custom settings. Offers optional relay and analog output for set point alarming and control, plus serial communications.

This advanced quad channel thermocouple controller is ideal for numerous industrial temperature applications. One of the key features of this instrument is its ability to average the inputs across 2, 3 or 4 temperature channels, and use this averaged value for a display source or for setpoint activation.

At a glance:

  • 4 x Thermocouple (J, K, N, R or T type)
  • Channel averaging across 2, 3 or 4 input channels
  • Signal averaging for individual channels
  • Customisable display
  • Choice of °F or °C

Specifications

Input


Number of input channels: 4


Processing rate: 10Hz


Resolution: 0.1°C


Zero drift: ±40nV/°C


Span drift: ±20ppm/°C FS max


Non-linearity: 1°C max


Input noise: 160nVp-p typical at 1Hz output rate


Noise rejection: 50/60Hz


Temperature units: Degrees F or C


Power


Power supply: HV (85–265V AC/95– 370V DC) or LV (15–48V AC/10–72V DC)


General Specifications


Output rate: Fixed 10Hz averaged per channel


Features


Security: Input and setpoint setups are independently accessible and PIN protected


Relay Output


Number of relay outputs: None, 2 or 4


Relay output type: 5A form A (3A 240V AC max or 3A 30V DC max)


Analog Output (Retransmission)


Number of analog outputs: None or 1


Analog output type: Isolated 16 bit 4–20mA / 0–10V (selectable)


Features: Fully scalable. Window programmable over any range within the controller’s full-scale range.


Comm Port(s)


Number of comm ports: None or 1


Serial port configuration: Isolated RS232 (RJ terminal) or RS485 (screw terminal)


Output mode: Custom ASCII, Modbus RTU slave, or Ranger A (5 updates/sec)


Baud rates: 1200–115k2 baud


Programming


Front panel buttons: Up, Down, P (Prog/ Enter), plus 2 Menu buttons (F)


Display


Display type: LED display, 5 buttons


LED indicators: 6 setpoint indicator LEDs


Digits: 1 row of 6 digits, 0.5″ (13mm), 14 segment alphanumeric LED


Full scale range: 0.1 to 99999.9


Construction


Casing: Panel mount case


Ingress protection rating: IP65 dust/ splash proof (face only)


Dimensions (H x W x D): 1.89 x 3.78 x 4.72″ (48 x 96 x 120mm)


Cutout area: 1.77 x 3.62″( 45 x 92mm)

Documents

PRO-TC Manual 19V01, 06-Mar-2019 | (7709 KB)

Order Codes

PRO-TC

-HV 85-265V AC / 95-370V DC
-LV 15-48V AC / 10-72V DC
Relay Output (Optional)
  None
-R2 2 x relay outputs
-R4 4 x relay outputs
Analog Output
  None
-A 1 x 4-20mA/0-10V analog output
Comms
  None
-S2R 1 x RS232 serial port (RJ11 terminal)
-S4S 1 x RS485 serial port (screw terminal)
Sample order codes: PRO-TC-HV, PRO-TC-HV-A-S2R, PRO-TC-HV-R2, PRO-TC-HV-R2-A, PRO-TC-HV-R2-A-S2R, PRO-TC-HV-R2-S2R, PRO-TC-HV-R4, PRO-TC-HV-R4-A, PRO-TC-HV-R4-A-S2R, PRO-TC-HV-R4-S2R, PRO-TC-HV-S2R, PRO-TC-LV, PRO-TC-LV-A-S2R, PRO-TC-LV-R2, PRO-TC-LV-R2-A, PRO-TC-LV-R2-A-S2R, PRO-TC-LV-R2-S2R, PRO-TC-LV-R4, PRO-TC-LV-R4-A, PRO-TC-LV-R4-A-S2R, PRO-TC-LV-R4-S2R, PRO-TC-LV-S2R

All prices are in US Dollars. For pricing in other currencies, please contact us.