PRO-RTD Quad RTD Controller
PRO-RTD Quad RTD Controller
4x RTD PT100Ω (Pt385/392/ CU10), 6-digit Panel Meter/Controller
Additional information
| Weight | 0.88 kg |
|---|---|
| Dimensions | 11.8 × 16.9 × 5.9 cm |
| Power Supply | – 85-265V AC / 95-370V DC (HV) |
| Relay Output | – None |
| Analog Output | – None |
| Serial Port | – None |
What it does
Accepts input from up to four RTD sensors, and performs averaging calculations as per your custom settings. Offers optional relay and analog output for set point alarming and control, plus serial communications.
This quad channel RTD controller is ideal for numerous industrial temperature applications. It accepts direct sensor input from RTD 385, 392 and CU10 temperature probes. One of the key features of this controller is its ability to average the inputs across 2, 3 or 4 temperature channels, and use this averaged value for a display source or for setpoint activation.
At a glance:
- 4 x RTD Pt100Ω (385/392/CU10)
- Channel averaging across 2, 3 or 4 input channels
- Signal averaging for individual channels
- Customisable display
- Choice of °F or °C
Specifications
Input
Number of input channels: 4
Sensor input: RTD PT100Ω (Pt385/392/CU10)
Excitation: 160μA
Processing rate: 5Hz
Resolution: 0.1°C
Span drift: ±30ppm/°C FS max
Non-linearity: 1°C max
Input noise: 160nVp-p typical at 1Hz output rate
Noise rejection: 50/60Hz
Temperature units: Degrees F or C
Power
Power supply: HV (85–265V AC/95– 370V DC) or LV (15–48V AC/10–72V DC)
General Specifications
Output rate: Fixed 10Hz averaged per channel
Features
Security: Input and setpoint setups are independently accessible and PIN protected
Relay Output
Number of relay outputs: None, 2 or 4
Relay output type: 5A form A (3A 240V AC max or 3A 30V DC max)
Analog Output (Retransmission)
Number of analog outputs: None or 1
Analog output type: 1 x Isolated 16 bit 4–20mA / 0–10V (selectable)
Features: Fully scalable. Window programmable over any range within the controller’s full-scale range
Comm Port(s)
Number of comm ports: None or 1
Serial port configuration: Isolated RS232 (RJ terminal) or RS485 (screw terminal)
Output mode: Custom ASCII, Modbus RTU slave, or Ranger A (5 updates/sec)
Baud rates: 1200–115k2 baud
Programming
Front panel buttons: Up, Down, P (Prog/ Enter), plus 2 Menu buttons (F)
Display
Display type: LED display, 5 buttons
LED indicators: 6 setpoint indicator LEDs
Digits: 1 row of 6 digits, 0.5″ (13mm), 14 segment alphanumeric LED
Full scale range: 0.1 to 99999.9
Construction
Casing: Panel mount case
Ingress protection rating: IP65 dust/ splash proof (face only)
Dimensions (H x W x D): 1.89 x 3.78 x 4.72″ (48 x 96 x 120mm)
Cutout area: 1.77 x 3.62″( 45 x 92mm)
Documents
Order Codes
PRO-RTD |
|
| -HV | 85-265V AC / 95-370V DC |
| -LV | 15-48V AC / 10-72V DC |
| Relay Output (Optional) | |
| None | |
| -R2 | 2 x relay outputs |
| -R4 | 4 x relay outputs |
| Analog Output | |
| None | |
| -A | 1 x 4-20mA/0-10V analog output |
| Comms | |
| None | |
| -S2R | 1 x RS232 serial port (RJ11 terminal) |
| -S4S | 1 x RS485 serial port (screw terminal) |
| Sample order codes: PRO-RTD-HV, PRO-RTD-HV-A-S2R, PRO-RTD-HV-R2, PRO-RTD-HV-R2-A, PRO-RTD-HV-R2-A-S2R, PRO-RTD-HV-R2-S2R, PRO-RTD-HV-R4, PRO-RTD-HV-R4-A, PRO-RTD-HV-R4-A-S2R, PRO-RTD-HV-R4-S2R, PRO-RTD-HV-S2R, PRO-RTD-LV, PRO-RTD-LV-A-S2R, PRO-RTD-LV-R2, PRO-RTD-LV-R2-A, PRO-RTD-LV-R2-A-S2R, PRO-RTD-LV-R2-S2R, PRO-RTD-LV-R4, PRO-RTD-LV-R4-A, PRO-RTD-LV-R4-A-S2R, PRO-RTD-LV-R4-S2R, PRO-RTD-LV-S2R | |
All prices are in US Dollars. For pricing in other currencies, please contact us.