PRO-FLO200 Flow Batching Totalizer
PRO-FLO200 Flow Batching Totalizer
Dual Display NPN, PNP, TTL, Namur, Tacho or Closed Contact, 2×6-digit Panel Meter/Controller
Additional information
| Weight | 0.869 kg |
|---|---|
| Dimensions | 11.8 × 16.9 × 5.9 cm |
| Power Supply | – 85-265V AC / 95-370V DC (HV) |
| Relay Output | – None |
| Analog Output | – None |
| Serial Port | – None |
What it does
Accepts digital pulse inputs from flow sensors and meters. Dual display shows the flow rate and volume.
This dual display flow batching totalizer accepts a variety of flow sensor inputs, and has a variety of advanced features, including: flow batching, volumetric pulse, in flight adjustment, setpoint latching, startup inhibit and user programmable input functions.
At a glance:
- NPN, PNP, TTL, namur, tacho or closed contact sensors
- Single totalizer
- Customisable display source, front panel button and rear input pins
- Batching feature
- Advanced setpoint features, including setpoint trailing, volumetric pulse, latching, startup inhibit and inflight adjustment
- Calibrate using direct K factor entry or pulses/unit method
- Signal averaging on the rate
- Dual display for simultaneous viewing of total and rate
Specifications
Input
Sensor input: NPN, PNP, TTL, namur, tacho or closed contact
Excitation: 24V DC (50mA max)
Accuracy: 0.005%
Ambient drift: Typically 2ppm/°C
K Factor ranges: 0.1 to 99.9999, 999.999 or 9999.99
Noise filtering: 0.2, 2, 20kHz or Off
Input frequency: 2Hz to 10kHz
Calibration: Direct K factor entry or pulses per unit of measurement
Power
Power supply: High voltage 85–265V AC / 95–370V DC, or Low voltage 15–48V AC / 10–72V DC
Relay Output
Number of relay outputs: None, 2 or 4
Relay output type: 5A form A (3A 240V AC max or 3A 30V DC max)
Analog Output (Retransmission)
Number of analog outputs: None or 1
Analog output type: Isolated 16 bit 4–20mA/0–10V
Features: Window programmable over any range within the full scale range of the controller
Comm Port(s)
Number of comm ports: None or 1
Serial port configuration: Isolated RS232 (screw terminal) or RS485 (RJ11 terminal)
Output mode: Define ASCII, Modbus RTU slave or Ranger A
Baud rates: 1200-115k2 baud
Parity: Odd, even, or none
Programming
Front panel buttons: Up, Down, P (Prog/Enter), plus 2x Function Buttons for menu access
Display
Display type: LED display, 5 buttons
LED indicators: 6 setpoint indicator LEDs
Digits: 2 rows of 6 digits, 0.4″ (10mm), 14 segment alphanumeric LED
Construction
Casing: Panel mount case
Ingress protection rating: IP65 dust/splash proof (face only)
Dimensions (H x W x D): 1.9 x 3.8 x 4.7″ (48 x 96 x 120mm)
Cutout area: 1.79 x 3.64″ (45.5 x 92.5mm)
Documents
Order Codes
PRO-FLO200 |
|
| -HV | 85-265V AC / 95-370V DC |
| -LV | 15-48V AC / 10-72V DC |
| Relay Output | |
| None | |
| -R2 | 2 x relay outputs |
| -R4 | 4 x relay outputs |
| Analog Output | |
| None | |
| -A | 1 x 4-20mA/0-10V analog output |
| Comms | |
| None | |
| -S2R | 1 x RS232 serial port (RJ11 terminal) |
| -S4S | 1 x RS485 serial port (screw terminal) |
| Sample order codes: PRO-FLO200-HV, PRO-FLO200-HV-A-S2R, PRO-FLO200-HV-R2, PRO-FLO200-HV-R2-A, PRO-FLO200-HV-R2-A-S2R, PRO-FLO200-HV-R2-S2R, PRO-FLO200-HV-R4, PRO-FLO200-HV-R4-A, PRO-FLO200-HV-R4-A-S2R, PRO-FLO200-HV-R4-S2R, PRO-FLO200-HV-S2R, PRO-FLO200-LV, PRO-FLO200-LV-A-S2R, PRO-FLO200-LV-R2, PRO-FLO200-LV-R2-A, PRO-FLO200-LV-R2-A-S2R, PRO-FLO200-LV-R2-S2R, PRO-FLO200-LV-R4, PRO-FLO200-LV-R4-A, PRO-FLO200-LV-R4-A-S2R, PRO-FLO200-LV-R4-S2R, PRO-FLO200-LV-S2R, PRO-FLO200-R2-HV, PRO-FLO200-R4-HV, PRO-FLO200-R2-LV, PRO-FLO200-R4-LV | |
All prices are in US Dollars. For pricing in other currencies, please contact us.