Zen RIO Relay I/O Expansion

Zen RIO Relay I/O Expansion
For the Zen Datalogger. Adds 16 Relay Outputs & 16 Digital Control Inputs.
What it does
The Rio expands the Zen Datalogger capabilites – adding 16 more relays and digital I/O.
The Zen RIO is a relay output and digital input expansion which is designed for seamless integration with the Zen Datalogger control and monitoring station. It is also compatible with the now superseded ‘ZEN-16’ product.
At a glance:
- The perfect add-on to extend your Zen Datalogger: Effortlessly adds 16 relay outputs and 16 digital control inputs
- Ideal for on/off control and alarm or status control
The Zen RIO’s relays are controlled directly by the Zen Datalogger’s setpoints, which are in turn easily configured using our user-friendly and flexible WorkBench software. The digital control inputs are designed for SCADA applications and can be read directly from the Zen Datalogger’s com ports.






Specifications
Power
Power supply: 24 V DC ±15%
Features
Expansion interface: Communication to Zen Datalogger via i2C bus, 400kHz
Relay Output
Number of relay outputs: 16x isolated relay outputs
Relay output type: Change over Form C (10A 250V AC or 10A 30V DC), 1kHz scan rate. Software selectable relay state.
Digital Inputs
Number of digital control inputs: 16x selectable digital control inputs
Digital control input type: Input type select NPN (sink) or PNP (source). 1kHz input sample rate. Input voltage 5-24V.
Construction
Casing: 35mm DIN rail casing
Dimensions (H x W x D): 2.32 x 10.04 x 5.67″ (59 x 255 x 144mm)
LED indication: On each relay output and digital control input channel
Documents
Software
Define WorkBench
Simple software to program your Zen series or edge processing device
Use Define WorkBench to simulate, configure and view data for all Zen series control stations and Nimbus IoT Gateways, including:
- Zen Datalogger 16 Channel Datalogger
- Zen RTU/R & Zen RTU/U Remote Terminal Units
- Zen IoT Edge Processing Interface
- Nimbus IoT Edge Processing Interface
- Legacy ZEN-16’s
With a user-friendly, uncluttered design, WorkBench offers a simple interface for setting up and scaling your unit, as well as retrieving and graphing your datalog.
N.B. Version 3 features Simulation Mode and is only compatible with legacy ZEN-16 firmware 2.0.0 and later.
All prices are in US Dollars. For pricing in other currencies, please contact us.